Commercial Solar ROI: How to Calculate Payback for Your Business
Before signing a commercial solar contract, here's how to run the numbers yourself — and what most installers won't volunteer upfront.
Buying a commercial solar system is a capital investment, not just an energy bill reducer. Yet many business owners sign contracts based on a single payback figure their installer calculated. Running your own numbers — or at least understanding how they're built — protects you from over-promising and helps you compare quotes fairly.
Why Commercial Solar ROI Is More Complex Than Residential
A home system is simple: you generate power, you use it or export it. A commercial system involves:
- Higher load variability — factories, cold stores, and offices consume power very differently across shifts and seasons
- Demand tariff components — many commercial electricity accounts include a separate demand charge based on peak 15- or 30-minute usage, which solar may not reduce
- Depreciation and tax treatment — businesses can depreciate solar assets, which changes the real after-tax cost
- Feed-in tariff limitations — commercial feed-in rates in most states are low (often 3–8 c/kWh), so self-consumption is where the value is
Ignoring any one of these can make a good system look great — or a mediocre one look acceptable.
Step 1: Establish Your Actual Self-Consumption Rate
Self-consumption is the share of solar generation your business actually uses on-site, rather than exporting. A system that runs while your building is occupied and powered up might achieve 70–85% self-consumption. A warehouse that's closed on weekends might manage 40%.
Ask your installer to show the self-consumption estimate and the assumptions behind it. If they can't, that's a red flag.
Rule of thumb: Every percentage point of self-consumption that shifts from export to on-site use can be worth 20–30 c/kWh more in value (buying at retail rather than selling at feed-in rates).
Step 2: Build a Simple Payback Calculation
The basic formula:
| Input | Where to get it |
|---|---|
| System cost after incentives (AUD) | Installer quote minus STC value |
| Annual energy savings (AUD) | Self-consumed kWh × retail tariff |
| Annual export revenue (AUD) | Exported kWh × feed-in tariff |
| Annual O&M costs (AUD) | Monitoring, cleaning, inverter reserve |
Ready to get started? Post your job free and local commercial solar tradies can quote.
Simple payback (years) = Net system cost ÷ (Annual savings + Export revenue − O&M costs)
For a 100 kW system costing $120,000 after STCs, generating $28,000 in annual savings and $3,000 in export revenue with $1,500 in O&M costs, simple payback is:
$120,000 ÷ ($28,000 + $3,000 − $1,500) = 4.1 years
Simple payback doesn't account for the time value of money. For a more rigorous view, ask for an NPV or IRR calculation using a discount rate that reflects your cost of capital (typically 6–10% for Australian businesses in 2026).
Step 3: Account for Depreciation and Tax
Australian businesses can claim solar systems as a depreciable asset. Depending on your circumstances and the current instant asset write-off thresholds, the effective after-tax cost of the system may be meaningfully lower than the sticker price. Speak to your accountant before signing — this can shift your payback by a year or more.
Step 4: Stress-Test the Key Assumptions
Most installer proposals use optimistic inputs. Before you accept a payback figure, ask:
- What retail tariff did you assume? If they used your current rate without accounting for the fact that tariffs may change, the model is fragile.
- What degradation rate did you apply? Solar panels lose roughly 0.5–0.7% of output per year. A 10-year model should reflect this.
- Is demand charge reduction included? If yes, how was it calculated? Demand savings are real but harder to guarantee.
- What happens if self-consumption drops? Ask for a sensitivity scenario at 20% lower self-consumption.
Common Mistakes That Inflate ROI Projections
- Using peak retail tariff rates without accounting for time-of-use pricing
- Omitting inverter replacement costs (central inverters often need replacement within 10–15 years)
- Assuming feed-in tariffs remain constant over the system's life
- Calculating payback on gross system cost rather than net-of-STC cost (or vice versa, inconsistently)
- Not modelling the impact of future load changes — if your business grows or shifts hours, generation and consumption patterns change
Actionable Takeaway
Before you approve any commercial solar proposal, build your own payback spreadsheet using the inputs above and run two scenarios: an optimistic case (installer's numbers) and a conservative case (reduce self-consumption by 15%, increase O&M by 20%, and apply 0.6% annual degradation). If the conservative case still delivers payback under seven years, the project is likely worth pursuing. If only the optimistic case works, negotiate harder or walk away.
Done researching? The next step is getting real quotes.
Get My Quotes — It’s Free →No obligation. Takes 60 seconds.
Business for sale

Established Blue Wheelers Mobile Dog Grooming Business – Nundah, Brisbane Northside
Established Blue Wheelers mobile dog grooming business on Brisbane's northside: 115 customers, about $76,500 in takings over the last 12 months, booked 4–5 days a week, with full training and handover.
Local tradies on TradiHub AI
See all →We don't have a matching tradie listed yet. Post your job free and local tradies can quote you directly.
Post a job, free →More tradies on TradiHub AI

Brisbane Bicycle Service
Bike Repair & Custom Builds

Bin Chicken Recycling
Rubbish Removal

ZC Property Maintenance
Painting · Carpentry · Fencing
Find local:Solar installers in IndooroopillySolar installers in ToowongSolar installers in BulimbaSolar installers in Logan
For tradies

Tradies: get found by local homeowners
A free-to-start local directory with your real Google reviews and an ABN-checked tick. No per-lead fees, no lock-in. Founding members wanted.